Performance Topcoats
Abrasion Resistant · Chemical Resistant · Stain Resistant · Reflective or Low Glare
Dur-A-Flex® Performance Topcoats offer you a complete selection of finishing solutions and give you an extra measure of control over the appearance and function of your commercial flooring systems. Together with the inherent chemical and abrasion resistant qualities of Dur-A-Flex® coatings and matrix layers, Performance Topcoats deliver superior corrosion resistance and increase your resin floor's longevity. Available in high-gloss, satin or flat urethane formulations or an attractive low-glare satin finish MMA coating, you can brighten or soften the lighting in your facility. Whatever your flooring application, Dur-A-Flex® topcoats make your floors better looking and easier to maintain.
Epoxy Performance Topcoats
Dur-A-Glaze Novolac epoxy is a clear or pigmented, two-component, low VOC protective aggregate binder and topcoat for broadcast systems providing protection against harsh chemicals and solvents.
DUR-A-GARD NOVOLAC epoxy is a pigmented two component, performance topcoat over Dur-A-Gard epoxy coatings and is designed to provide protection against chemicals, acids, solvents, and high temperatures.
ULTRA-CLEAR is a clear, two component 100% solids, thermosetting epoxy designed specifically for the DUR-A-QUARTZ, and DUR-A-CHIP decorative flooring systems.
MMA Performance Topcoats
CRYL-A-TOP T-301 is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic reactive resin. It is formulated to form a monolithic bond with other CRYL-A-FLEX systems and to be UV resistant.
CRYL-A-TOP T-303 is a 100% reactive, fast curing, high strength, methyl methacrylate (MMA) based, acrylic reactive resin. It is formulated to form a monolithic bond with other CRYL-A-FLEX systems and to be UV resistant. It is similar to T-301 with the added benefits of thermal shock resistance and improved wear charcteristics in high traffic areas.
Urethane Performance Topcoats
Poly-Crete KT is a 100% solids aromatic urethane used to topcoat Poly-Crete MDB floors.
Poly-Crete TF is a solvent free, high build coating based upon polyurethane technology. It is designed as a topcoat for Poly-Crete WR and Poly-Crete HF.
Poly-Thane 1 is a clear, two component aromatic polyester urethane performance topcoat.
Poly-Thane 2 High Solids is a two-component, clear polyester high solids protective coating.
Dur-A-Glaze No. 5 is a clear, two component aliphatic polyaspartic ester high performance polymeric system.
ARMOR TOP is a two, three or four component aliphatic urethane protective coating. It was formulated for high traffic areas to protect against chemicals and wear. It is available in either a clear or pigmented, gloss or satin finish, and with or without high wear resistant aluminum oxide (grit).
Poly-Crete CF is a color fast 100% solids, three-component, cementitious aliphatic urethane topcoat.
