Additives can be used to change viscosity, add grit for texture, add an antimicrobial treatment, pigment, and more! Enhance your Dur-A-Flex flooring products with any of these additives.
ACCELERA BP is a special liquid additive that promotes the bonding of ACCELERA EXT coatings to existing ACCELERA floor systems.
Add-A-Color No. 4 Concentrate
Add-A-Color No. 4 Concentrate is a colorant specifically for use in Dur-A-Shield No. 2 and Poly-Thane 2 High Solids.
Cryl-A-Bond is a modified methyl methacrylate (MMA) component that can be added to Cryl-A-Prime P-101 to increase bond strength.
Cryl-A-Bond MT is a methyl methacrylate (MMA) based modifier that can be added to Cryl-A-Prime P-101 resins to improve bonding when coating metal or ceramic tile.
Cryl-A-Cure is the initiator used for the polymerization of all Cryl-A-Flex methyl methacrylate (MMA)based resins and Cryl-A-Tex polymer concrete.
DUR-A-GLAZE® #4 FIELD PIGMENT PACKS
DUR-A-GLAZE #4 FIELD PIGMENT PACKS are a concentrated pigment suspension for pigmenting clear Dur-A-Glaze #4 Resin in the field.
Dur-A-Grit is an aluminum oxide aggregate that can be broadcast into the topcoat of resinous flooring systems to add a non-slip texture.
DUR-A-SOLVE is a unique combination of aromatic solvents, designed for use with Dur-A-Flex Epoxy products and for various uses around jobsites.
Fish-Eye Eliminator is a special liquid additive that allows epoxy systems to flow out on silicone or oil contaminated substrates, including existing epoxy or urethane floors.
LTC (Low Temperature Cure) Additive is an accelerator for use in Cryl-A-Flex MMA based acrylic resins.
All Dur-A-Flex, Inc. 100% Solids Flooring systems are available with MICROPEL® Antimicrobial. This treatment will provide the floor with long-term protection against a broad spectrum of bacterial and fungal attack. It will also help prevent surface growth, musty odors, permanent staining and the development of fungal spores.
No Sag No. 1
No Sag No. 1 is a dry powder designed to thicken Elast-O-Coat while allowing it to remain flexible.
No Sag No. 2
No Sag No. 2 is a dry powder designed to thicken epoxies that require a higher viscosity, making it possible to apply onto vertical surfaces.
Poly-Crete® HF Accelerator
Poly-Crete HF Accelerator is used for fast cure of our three component POLY-CRETE HF system where faster return to service is needed.