Primers & Sealers
The best flooring system installations start with a coat of primer that seals and strengthens your floors and creates a tough, smooth, uniform bonding surface.
Cryl-A-Prime P-101 is a 100% solids, fast curing, high strength methyl methacrylate (MMA) based, acrylic reactive resin. It is formulated to form a cohesive bond with the substrate.
Dur-A-Glaze® ESD Primer
DUR-A-GLAZE #4 ESD PRIMER is a 2-component, 100% solids Static Dissipative Primer designed as a concrete primer for DUR-A-GARD ESD.
Dur-A-Glaze® MVP Primer
Dur-A-Glaze MVP Primer is a 2-component, 100% solids moisture mitigation system. It reduces moisture levels as high as 99% RH and 20 lbs./1,000 sq.ft./24 hrs. to less than 3 lbs,/1,000 sq.ft./24 hrs. It can be used under any Dur-A-Flex epoxy floor system.
DUR-A-GLAZE® MVP3 PRIMER
- Low Odor / Low VOCs
- Quick Cure
- Moisture Mitigating
DUR-A-GLAZE MVP3 is a clear, 100% solids epoxy moisture vapor barrier and primer featuring F3010-18 low permeability compliance and is formulated to bond to concrete with a substrate relative humidity (RH) as high as 99%.
Dur-A-Glaze® No. 4 WB Primer
Dur-A-Glaze No. 4 WB is a two component, water-borne, low-VOC epoxy designed to prime new or existing concrete floors.
DUR-A-TEX LMS Primer
DUR-A-TEX LMS PRIMER is zero VOC, one-component acrylic polymers designed for use as primers for FLEXLINE LM PLUS MORTAR when applied over sealed substrate.
DUR-A-TEX UM PRIMER
DUR-A-TEX UM PRIMER is a zero VOC, cementitious urethane coating designed for use as a primer under DUR-A-TEX UM urethane mortar utilizing DUR-A-TEX UM resin and hardener and a DUR-A-TEX UM PRIMER aggregate.
DUR-A-WALL HP BLOCK FILLER
DUR-A-WALL HP BLOCK FILLER is high quality interior acrylic block filler formulated to fill small imperfections and pinholes in masonry block and porous concrete before top-coating.
DUR-A-WALL HP GRIPPER PRIMER
DUR-A-WALL HP GRIPPER PRIMER is a water-based urethane-modified acrylic primer-sealer with excellent adhesion to new wallboard, sheetrock, and gypsum board.