Logo for: Duraflex

Accelera RXC: Broadcasting Decorative Chip

June 3, 2022

Accelera® RXC has a longer wait time for broadcasting than other Accelera Systems. Timing is critical.

After back-rolling and cross-rolling, wait approximately 20 minutes (@ 70°F / 50% RH) for the material to begin to “set” (ensure spike marks are still healing) and then begin broadcasting decorative aggregate into the ACCELERA® RX body coat.

Wait 20 mins to broadcast-Accelera RXC

Before 20 mins, it is likely the broadcast will sink creating pockets of smooth texture. For best results, broadcast slowly, completing any touchups approximately 5 minutes after broadcasting.

‹ Back to Tech Tips