Logo for: Duraflex

Don’t Twist the Loop Roller

February 3, 2021

A loop roller is used to remove the squeegee lines after applying Poly-Crete SL. You should make approximately 5-10 passes before moving on to the next section. When working the loop roller, be careful not to twist the roller. This motion can push the material and create a divot. If the divot is deep enough, you will have to stop rolling and bring material to that spot using a squeegee. In this instance, we can repair it with the loop roller, but you may not be so lucky.

Rob Pacheco Jr.
Technical Manager – Northeast


‹ Back to Tech Tips