Logo for: Duraflex

Fight the Fling

October 21, 2019

Any time you are installing a self-leveling system, spike rolling or loop rolling must be completed immediately after spreading the material. This eliminates lines and helps release air.

If your roller operator is not careful, they can fling material onto other surfaces not meant to be coated

A quick and easy way to project surfaces, such as a freshly painted wall or FRP, is to set Tape & Drape (or a similar product) slightly above the area where the coating is being applied. The lightweight disposable plastic sheet will protect surfaces from any spatter that may occur.

Bret LePard
Technical Manager – Midwest


‹ Back to Tech Tips