Logo for: Duraflex

Increasing Adhesion Over Existing Accelera Systems

August 13, 2018

Accelera BP is a bond promoting liquid additive that can be added to Accelera EXT to increase the adhesion when installing over an existing Accelera coating.

Here are a few tips that will ensure a successful Accelera EXT with BP install:

  • Completely de-gloss the existing coating
  • After vacuuming the floor, tack rag to remove the fine particles that are left on the surface
  • Always follow proper mixing procedure when adding the BP additive to Accelera EXT.
  • Add 1.5 oz of BP to a Large Accelera EXT Resin and mix immediately for 15 seconds.
  • Add the Accelera EXT Hardener immediately after the prior step and mix for an additional 30 seconds.
  • Apply right away. Do not allow the BP to sit in the Resin (mixed or unmixed) as it will begin to react.

Full details of Accelera BP can be found on the Product Data Sheet.

Dylan Snyder
Technical Manager – West

‹ Back to Tech Tips